Update your browser to view this website correctly.
U-Value measurements generate reliable, quantitative data
Calculation of needed heating requirements to avoid oversizing
Exact status-quo assessment increases quality of planning
Retrofitting according to legal standards and subsidiary schemes possible
In case of a damage, an U-Value measurement can increase the transparency between parties
A large part of the energy consumption is caused by badly insulated buildings. With greenTEG’s measurement solutions you can precisely measure the heat loss of buildings. On the basis of the measured data, energetic retrofitting can be planned accordingly.
Measures how much heat (in Watt) flows through one square meter of a wall
Delivers reliable quantitative data
Heat flux method according to ISO-9869
Non-invasive measurement
Easy processing of measured data
Measurements starting from 5° C temperature difference
This schematic shows the basic measurement set-up. When making measurements with the gO Measurement System the data will be sent to the cloud and can be remotely monitored in real-time.
A precise status quo assessment of the U-value before a refurbishment increases the quality of the overall planning.
Dew point assessment via room humidity and surface temperature measurement
Quantitative assessment of heat bridges via U-value measurement
In case of dispute between project partners, a non-invasive U-value measurement can increase the transparency between the project partners
Exact measurement tool for U-value measurement in R&D of new insulation materials
Tool for quality control in the production of insulation materials
Energy Consultants
Architects
Building Phyisicists
Insulation Experts
Scientists
Mould Experts
1. Install and start base station.
2. Place the sensor nodes on the inner wall, ensuring they are no more than 100m from the base station. Check connection to the base station.
3. Place sensor node for the outer temperature measurement at about the same height as the inner sensor node inside the building. Measurement process starts automatically with start of the base station.
4. Live view of the measurement results via cloud, inclusive U-value.
